In fact, we will find that cable tray plays an important role in our daily life. But it will also bring troubles to our production and life. What problems will occur in the use of Shandong cable tray?
1、 The short circuit of each part of the cable may cause the current relay on the power distribution cabinet to act and cause serious damage to the cable;
2、 The internal short circuit of the cable is usually caused by the low quality of the cable, and there is no trace on the surface;
3、 The whole cable may be burnt out, or the cable may be burnt out somewhere, causing serious damage to the cable in case of failure;
4、 The possible fault is that there is only one short circuit in the cable tray. The cable at the fault is slightly damaged, but there are still obvious traces.
These problems may be caused by excessive current or poor cable quality.
All mechanical equipment shall be inspected and maintained regularly after use, and Shandong cable tray is no exception.
1. Test and check the action of the balance cylinder of the cable bridge equipment and its oil circuit and oil lubrication system connector
2. The sliding block and guide rail of the bridge equipment have frequent friction, so necessary adjustment and correction shall be made, and the lubrication quality and pipeline at the joints shall be checked to ensure good operation.
3. Regularly lubricate the gear parts of Shandong cable tray equipment: the gear box and internal parts are more likely to be damaged and loose due to frequent operation.
To avoid these problems during the use of cable tray, the whole project can be completed smoothly and with high quality. Do you have any doubts or requirements to meet? Follow us http://www.yeeones.com , learn more!