有線纜的地方就有橋架。橋架的應用范圍相當廣泛，各行各業都有涉足，大多數應用在數據中心、辦公室、互聯網服務供應商、醫院、學校/大學機場及工廠等。那么山東電纜橋架安裝過程中如何防護？

Where there are cables, there are bridges. The bridge has a wide range of applications, involving all walks of life, most of which are used in data centers, offices, Internet service providers, hospitals, schools/university airports and factories. How to protect the cable bridge in Shandong during installation?

一、如果安裝的是電纜橋架，那么防備電纜被刮傷的設施步驟是一定要有的。比方各種三通，彎頭，四通比較好接的圓弧形造型是一定要在電纜的引下時接配進入的。

1、 If the cable tray is installed, the facilities and steps to prevent the cable from being scratched must be available. For example, the arc shape of various tees, elbows and crosses that are easy to connect must be connected when the cable is led down.

電纜的橋架在由室外往室內引進的時候一定要進行密封，比方說可以選擇沙封或者是防火的堵料等等，另外，如果采用的是玻璃鋼來進行橋架設施，在由室外往室內引進時一定要采取傾斜的方式。

The cable tray must be sealed when it is introduced from outdoor to indoor. For example, sand seal or fireproof blocking material can be selected. In addition, if glass fiber reinforced plastic is used for bridge facilities, it must be inclined when it is introduced from outdoor to indoor.

一般情況下，傾斜坡度達到百分之一，就能夠防止雨水的灌溉。不過按照不同的安裝形式也需要采取不一樣的方法，選擇到的可用制品一定要進行慎重以及全面的考慮。

Generally, when the slope reaches 1%, it can prevent rainwater irrigation. However, different methods should be adopted according to different installation forms, and the available products must be carefully and comprehensively considered.

二、如果采用的支架是流體形式，那么它的格局一定要先預埋在鐵件上焊接，采用的好也要是收縮的螺栓流動形式。如果中央要有線纜，那么它的運用局限，一定要足夠普及，在不同的行業里面或多或少都會設置到這樣的安裝方式，絕大多數都是應用在各種數據的中央辦公室以及互聯網的辦事供給商等場合里面。

2、 If the support used is in the form of fluid, its pattern must be embedded in the iron parts for welding, and the good one is also in the form of shrinkage bolt flow. If there are cables in the center, its application limitations must be universal enough. Such installation methods will be set more or less in different industries. Most of them are used in central offices of various data and Internet service providers.

三、作為電纜橋架一定要有防止電纜被刮傷的措施，所以我們在對平面圖上進行橋架的繪圖的時候，一定要對她的起點，拐彎點中點以及分支點，包括各種升降點進行具體的坐標確定。另外，在圖上面一定要對直線進行全長注明，包括各種拐彎點，型號規格，標高等通通都需要進行注明出來。

3、 As a cable bridge, there must be measures to prevent the cable from being scratched, so when we draw the bridge on the plan, we must determine the specific coordinates of its starting point, the midpoint of the turning point and the branch point, including various lifting points. In addition, the full length of the straight line must be indicated on the drawing, including various turning points, models and specifications, elevations, etc.

四、如果在電纜的接線位置需要進行捆綁，千萬不能夠放置曹線布，盡可能的做到不交叉，不溢出槽的目的，所以在纜線的進出口處，或者是轉彎處都應該進行綁扎固定。如果是垂直的線槽布，那就應該做到每隔一米，就將它固定一個纜線的支架。這樣才能夠保證到這個工程的規格和要求是合格的。

4、 If it is necessary to bind the cable at the wiring position, it is not allowed to place the cable cloth, and try not to cross and overflow the slot, so the cable should be bound and fixed at the entrance and exit of the cable or at the corner. If it is a vertical trunking cloth, it should be fixed with a cable support every one meter. Only in this way can we ensure that the specifications and requirements of the project are qualified.

在進行電纜橋架敷設的時候的確是有很多需要注意的地方，為了能夠讓它實現更好的作用性以及在外觀上看上去更加的美麗得體，我們不得不時時刻刻考慮它的做工對稱以及距離分隔等問題。更多相關內容就來我們網站http://www.yeeones.com咨詢！

There are indeed many things to pay attention to when laying the cable tray. In order to make it more functional and beautiful in appearance, we have to consider its symmetry of workmanship and distance separation at all times. Come to our website for more relevant content http://www.yeeones.com consulting service