電纜橋架可分為槽式、托盤式和梯式、網式等。它由支架、支架臂和安裝附件組成。那電纜橋架可以分為哪幾種？安裝有什么要求嗎？下面山東電纜橋架廠家為您講解。

Cable tray can be divided into trough type, tray type, ladder type, net type, etc. It consists of bracket, bracket arm and installation accessories. What are the types of cable tray? Are there any requirements for installation? Next, Shandong cable tray manufacturer will explain to you.

電纜槽大致可分為以下五類：

Cable trays can be roughly divided into the following five categories:

槽式電纜橋架是一種全封閉的電纜橋架，可以很好的控制電纜的屏蔽干擾，對重腐蝕環境下的環境電纜起到很好的保護作用和效果。

The trough type cable tray is a fully enclosed cable tray, which can well control the shielding interference of the cable and play a good role in protecting the environmental cable in the heavily corrosive environment.

t型階梯式電纜橋架適用于敷設大直徑電纜，可同時敷設高低壓電力電纜。這種電纜橋架具有重量輕、成本低、散熱通風好的特點。

T type ladder cable tray is suitable for laying large diameter cables, and can be used for laying high and low voltage power cables at the same time. The cable tray has the advantages of light weight, low cost and good heat dissipation and ventilation.

大跨度電纜橋架一般由拉擠玻璃鋼型材組裝而成，可應用于電力電纜、控制電纜、照明電纜及附件等。

Large span cable tray is generally assembled by pultruded FRP profiles, which can be used for power cables, control cables, lighting cables and accessories.

組合式電纜橋架只需制作彎頭、三通等附件，可以通過管道在任何位置引出，無需鉆孔或焊接。不僅便于生產運輸，而且便于安裝施工。是電纜橋架中理想的產品。

The combined cable tray only needs to make elbows, tees and other accessories, which can be led out at any position through pipes without drilling or welding. It is not only convenient for production and transportation, but also convenient for installation and construction. It is an ideal product for cable tray.

電纜槽這種電纜橋架廣泛應用于石油、化工、輕工等領域，具有很強的通用性。這種電纜橋架不僅適用于電力電纜的安裝，也適用于控制電纜的敷設。

The cable tray is widely used in petroleum, chemical industry, light industry and other fields, with strong universality. This cable tray is not only suitable for the installation of power cables, but also for the laying of control cables.

安裝要求：

Installation requirements:

1.當電纜橋架遇到需要用電的設備時，距離應大于0.5米。

1. When the cable tray meets the equipment requiring electricity, the distance shall be greater than 0.5m.

2.當兩組電纜在同一高度平行時，它們之間的距離應大于0.6米。

2. When two groups of cables are parallel at the same height, the distance between them should be greater than 0.6 m.

3.在線槽內敷設電纜時，線槽內的電纜應平直。

3. When laying cables in trunking, the cables in trunking shall be straight.

4.安裝在吊頂內時，槽蓋開啟的一側應留有80mm的垂直間隙，槽段利用率應小于百分之五十。

4. When installed in the suspended ceiling, a vertical clearance of 80mm shall be left on the open side of the slot cover, and the utilization rate of the slot section shall be less than 50%.

這篇文章主要講述了電纜橋架的分類及安裝要求，相信大家在看完之后會對電纜橋架有一定的了解，希望能對大家產生幫助。更多相關內容就來我們網站http://www.yeeones.com咨詢吧！

This article mainly describes the classification and installation requirements of cable tray. I believe you will have a certain understanding of cable tray after reading it, and I hope it can help you. More relevant content will come to our website http://www.yeeones.com Consult!