橋架的檢驗工作一直是一個對比主要的一項流程，只要質檢合格的橋架才干被答應運用。那么檢驗橋架你知道怎么做嗎？下面濟南電纜橋架廠家為您講講。

The inspection of cable tray has always been a major process of comparison, and only those qualified in quality inspection can be used. Do you know how to inspect the cable tray? Now, Jinan cable tray manufacturer will tell you something.

咱們要了解一下橋架的構成構造。電纜橋架分為槽式、托盤式和梯架式等構造,由支架、托臂和裝置附件等構成。選型時應留意橋架的一切零部件是不是契合系列化、通用化、標準化的成套請求。

Let's understand the structure of the cable tray. The cable tray is divided into trough type, tray type and ladder type structures, which are composed of supports, corbels and device accessories. When selecting the model, pay attention to whether all parts of the cable tray meet the requirements of serialization, generalization and standardization.

建筑物內橋架能夠獨立假設,也能夠附設在各種建(構)筑物和管廊支架上,應表現構造簡略,外型漂亮、裝備靈敏和修理便利等特色,悉數零件均需進行鍍鋅處理,裝置在建筑物外露天的橋架,如果是在鄰近海濱或歸于腐蝕區,則原料有必要具有防腐、耐潮氣、附著力好,耐沖擊強度高的物性特色。

The bridge in the building can be independently assumed, and can also be attached to various buildings (structures) and pipe gallery supports. It should show the characteristics of simple structure, beautiful appearance, sensitive equipment and convenient repair. All parts should be galvanized. If the bridge installed outside the building is located in the open air, if it is near the sea or belongs to the corrosion area, the raw materials must have the physical characteristics of anti-corrosion, moisture resistance, good adhesion and high impact strength.

依據構造，咱們能夠看出來，那些關于橋架來說，是更為主要的，比如說：支架，托臂等，這些將作為重點的檢驗查看目標。

According to the structure, we can see that the bridge is more important, such as support, corbel, etc. These will be the key inspection targets.

1、電纜吊、支架種類、標準、數量是不是與定貨單共同，緊固附件是不是準確。

1. Whether the types, standards and quantities of cable hangers and supports are consistent with the purchase order, and whether the fastening accessories are accurate.

2、電纜橋架的種類、標準和數量有必要與訂貨單共同，原料及其厚度應契合請求，通常橋架寬在300mm以上時，鋼板厚度為1.5mm，橋架寬300mm及以上時鋼板厚度大于或等于2mm，銜接板厚度與橋架一樣。

2. The type, standard and quantity of cable tray shall be consistent with the purchase order. The raw materials and their thickness shall meet the requirements. Generally, when the tray width is more than 300 mm, the steel plate thickness is 1.5 mm. When the tray width is 300 mm or more, the steel plate thickness is greater than or equal to 2 mm. The thickness of the connecting plate is the same as that of the tray.

3、將出場直線槽、部件等現場式拼裝，查看銜接縫是不是均勻，且不大于1mm。

3. Assemble the outgoing straight grooves, components, etc. on site, and check whether the seam is uniform and not greater than 1mm.

4、電纜橋架部件的種類、標準、數量是不是與定貨單共同，包括部位曲折方向，橋架蓋設置方位等是不是準確。

4. Whether the type, standard and quantity of cable tray components are the same as those in the order, including whether the winding direction of the parts and the setting direction of the tray cover are accurate.

5、有防火請求的其消防存案回執應在有用期內，確保消防產品的質量合格牢靠。

5. If there is a fire protection request, the fire protection record receipt shall be within the useful period to ensure that the quality of fire protection products is qualified and reliable.

6、一切直線槽、部件、吊支架是不是有機械損傷，金屬原料的防腐是不是均勻、完好、不流淌、不透底。

6. Whether all linear grooves, components and lifting brackets are mechanically damaged, and whether the anti-corrosion of metal materials is uniform, intact, non flowing and non transparent.

7、電纜橋架銜接板、緊固附件是不是準確。

7. Whether the cable tray connecting plate and fastening accessories are accurate.

以上是依據橋架的構造來進行有用的檢驗工作的小知識，歡迎大家多多關注我們的網站http://www.yeeones.com！為您提供電纜橋架的相關資訊！

The above is a useful inspection knowledge based on the structure of the cable tray. You are welcome to pay more attention to our website http://www.yeeones.com ！ Provide you with relevant information about cable tray!